|
* Configuration Supplemental
- Related pages in the operation manual: p. 21,
47
When firewall setting is enabled by Windows or virus check software, the
phenomenon in which camera connection is disabled or image is not
displayed may occur. Set firewall setting properly, according to the
instructions of Windows or virus check software.
- Related pages in the operation manual: p. 21,
47
At factory setting, Ports in TCP:80, 3490-3493 UDP:3000-4000 are used. Set
the port setting properly when connecting the router/Firewall equipment
etc. to this product.
- Related pages in the operation manual: p. 21, 47
When accessing to this unit via Web browser or [ ELMO 1Channel Viewer ],
Install sound device onto the PC.
* Camera Operation Supplemental
- Related pages in the operation manual: p. 42,
63
In the network connection, depending on the transmission state, when the
control permission setting is "time slice share," a condition
may occur where none of the clients that are connected can gain control.
It should return to normal in a few seconds or minutes.
* User Authentication Supplemental
- Related pages in the operation manual: p. 23,
42, 63
Even when "user Authentication" is set to "Disable" in
the camera control setting, the user Authentication screen will appear
when the camera is connected. When "user Authentication" is set
to "Disable", press "OK" in the user Authentication
screen without entering a login name and password to log in to the
camera.
* Sound Input/Output Supplemental
- Related pages in the operation manual: p. 49,
50
When running the viewer, set the MPEG4 frame rate to "10" or
higher for sound input and output.
- Related pages in the operation manual: p. 49,
50
When running the viewer, sound is input into the client PC and output from
speakers with amplifier connected with the camera, log into the camera as
the administrator.
* Alarm Actions Supplemental
-
Related pages in the operation manual: p. 34, 55
When using "alarm input 1" and "alarm input 2", set
MPEG4 frame rate to "10" or higher for alarm action.
- Related pages in the operation manual: p. 48, 49
When running the viewer, logs other than alarm inputs such as "Jpeg
setting" are displayed at the bottom of the viewer screen.
* System Time setting Supplemental
- Related pages in the operation manual: p. 46,
65
The built-in clock is addressed to 2037/12/30. To make E-mail function,
FTP function, Still image storage work properly, set the Time of Day
within the limits.
|
|
* Correction on Sending E-mail
- Related pages in the operation manual: p. 15,
34, 35, 36, 55, 56, 75, 76
In this version of the camera, the "Send E-mail" does not
function. This matter will be addressed in the future by upgrading the
firmware version. Please refrain from selecting "Send E-mail"
"FTP and Send E-mail" in the alarm action item in the alarm
settings.
* Correction on sending FTP
- Related pages in the operation manual: p. 15,
34, 35, 37, 55, 57, 75, 77
In this version of the camera, the "Sending FTP" does not
function. This matter will be addressed in the future by upgrading the
firmware version. Please refrain from selecting "Send FTP"
"FTP and Send E-mail" in the alarm action item in the alarm
settings.
* Correction on Import/Export of Settings
- Related pages in the operation manual: p. 66
The "Export settings" function is to save the various set values
of the camera to PC. However, the preset positions of the camera cannot be
exported. It must be registered preset positions again.
* Correction on CF slot, USB Connector
- Related pages in the operation manual : p.12
In this version of the camera, the "CF slot, USB connector" does
not function. This matter will be addressed in the future by upgrading the
firmware version.
* Correction on Emergency storage
In this version of the camera, the "Emergency storage" does not
function in spite of the description of the name on setting menu. This
matter will be addressed in the future by upgrading the firmware version.
|
