|
* Configuration Supplemental
- Related pages in the operation manual: p. 21,
46
When firewall setting is enabled by Windows or virus check software, the
phenomenon in which camera connection is disabled or image is not
displayed may occur. Set firewall setting properly, according to the
instructions of Windows or virus check software.
- Related pages in the operation manual: p. 21,
46
At factory setting, Ports in TCP:80, 3490-3493 UDP:3000-4000 are used. Set
the port setting properly when connecting the router/Firewall equipment
etc. to this product.
- Related pages in the operation manual: p. 21,
46
When accessing to this unit via Web browser or [ ELMO 1Channel Viewer ],
Install sound device onto the PC.
* Camera Operation Supplemental
- Related pages in the operation manual: p. 41,
61
In the network connection (web browser connection, viewer connection),
"Home" position cannot be registered in "Save Preset,"
which saves the current camera position. It can be registered using the
remote control. (see p. 26).
* User Authentication Supplemental
- Related pages in the operation manual: p. 22,
41, 61
Even when "user Authentication" is set to
"Disable" in the camera control setting, the user Authentication
screen will appear when the camera is connected. When "user
Authentication" is set to "Disable", press "OK"
in the user Authentication screen without entering a login name and
password to log in to the camera.
* Sound Input/Output Supplemental
- Related pages in the operation manual: p.
48
When running the viewer, set the MPEG4 frame rate to "10"
or higher for sound input and output. - Related pages in the operation
manual: p. 49 When running the viewer, sound is input into the client PC
and output from speakers with amplifier connected with the camera, log
into the camera as the administrator.
* Alarm Actions Supplemental
-
Related pages in the operation manual: p. 33, 53
When using "alarm input 1" and "alarm input 2",
set MPEG4 frame rate to "10" or higher for alarm action. -
Related pages in the operation manual: p. 46, 47 When running the viewer,
logs other than alarm inputs such as "Jpeg setting" are
displayed at the bottom of the viewer screen.
* System Time setting Supplemental
- Related pages in the operation manual: p. 45,
63
The built-in clock is addressed to 2037/12/30. To make E-mail
function, FTP function, Still image storage work properly, set the Time of
Day within the limits.
|
|
* Correction on Sending E-mail
- Related pages in the operation manual: p. 14,
33, 34, 53, 54, 72, 74
In this version of the camera, the "Send E-mail" does not
function. This matter will be addressed in the future by upgrading the
firmware version. Please refrain from selecting "Send E-mail"
"FTP and Send E-mail" in the alarm action item in the alarm
settings.
* Correction on sending FTP
- Related pages in the operation manual: p. 14,
33, 36, 53, 55, 72, 75
In this version of the camera, the "Sending FTP" does not
function. This matter will be addressed in the future by upgrading the
firmware version. Please refrain from selecting "Send FTP"
"FTP and Send E-mail" in the alarm action item in the alarm
settings.
* Correction on Import/Export of Settings
- Related pages in the operation manual: p. 64
The "Export settings" function is to save the various set values
of the camera to PC. However, the preset positions of the camera cannot be
exported. It must be registered preset positions again.
|
